Lamborghini Huracan Tecnica no drill / quick release front license plate mount ,
Lamborghini Huracan Tecnica no drill front license ,
Manufactured by us in England.
Huracan Tecnica front license plate mount , which is no drill and with the
added benefit of being quick release (2022 to present ) ,
This fantastic no drill front license plate mount is the perfect solution to fitting a front licence plate to
low central position of the front of the car and is also able to be removed in
seconds.
This license plate mount comes in 2 sections ,the sprung front license plate mount and a
retaining hook mount that has to be bolted to the underside of the car ( NO HOLES ARE
ARE REQUIRED TO BE DRILLED AS THE HOOK PLATE PICKS UP AND USES THE EXISTING
FACTORY FITTED BOLT POSITIONS.) THE FITTING OF THE HOOK PLATE ONLY REQUIRES
15 MINUTES LABOUR TO UNBOLT THE EXISTING BOLTS AND HOLD UP THE MOUNTING
HOOK PLATE AND BOLD IT INTO POSITION.
THE BOLTING OF THE MOUNTING PLATE IS A 1 OFF OPERATION AND IS LEFT PERMANENTLY ON
UNDERSIDE OF THE CAR ,THE FRONT SECTION OF THE LICENSE MOUNT HOOKS ONTO THE LOWER FRONT BUMPER SECTION AND THE HOOK PLATE AND IS RETAINED IN PLACE BY THE SPRUNG LOADED MECHANISM .
No drilling of your bumper required.
No modifications to the car to fit our uniquely designed License mount.
Fit and remove the bracket/licence plate in seconds.
Fantastic for car shows or track day events when you need to remove your license plate.
Ultra soft 5mm thick exoanded neoprene sponge strips fitted to surfaces that touch your bumper.
License plate support face 200mm+75mm manufactured from 1.6mm zintec sheet steel .
UK standard plate size 520mm+111mm to 200mm+75mm number plates fit easily onto the mount plate.
All size License Plate fit this no drill license holder.
License plate mounting can also be manufactured to a smaller size if required.
Black 80% gloss powder coating to all sheet steel elements of the bracket.
All sheet steel elements manufactured with 1.6 mm thick zintec.
1.5mm A class helical compression springs ,manufactured with carbon spring steel & bright zink plated BSEN1SO9001 rated.
Spring loaded clamping mechanisms hidden on the underside of the bumper.
All bolts/lock nuts including the sliding mechanism manufactured with 304 grade stainless steel.
Mounting support and clamping mechanism will not decrease the ground clearance of the car.
Does not interfere with parking sensors.
Does not interfere with front parking camera.
License plate mount / clamp comes completely assembled.
3M Double sided license plate tape is also included with the mount .
Collection from or Wickford factory.
What's in the box the box.
Pre-assembled license plate mount.
Under side hook plate.
3M Double sided foam tape for fitting of your License plate to the mount.
